Model QES1508-057 8.4 In LCD replaces Totoku MDT947B-2B, 9 In, TTL CRT Monitors used in Fanuc 0-C, 0-TC, 0-MC Series Control Panels.
Totoku MDT947B-2B Upgrade, 9 In Monochrome CRT Monitor
Need to upgrade your legacy Totoku MDT947B-2B? When the Totoku MDT947B-2B, A61L-0001-0093 or Toshiba D9MM-11A Monochrome monitor in your Fanuc CNC Machine control fails and you need to find a drop-in replacement monitor quickly, look no further. Our QES1508-057 high-performance, 8.4-inch Active Matrix TFT LCD monitor with its rugged, open-frame steel chassis drops right into the mounting holes of the original Fanuc 9 In CRT, making it unnecessary to replace or make expensive modifications to the original FANUC CRT monitor chassis.
Upgrading the Totoku MDT947B-2B 9 inch Monochrome CRT Monitor
CRT monitors can be unreliable, and in the event of failure, your CNC Controller can be down for days at a time when you need it the most. If and when this happens, installing an LCD upgrade is the fastest and most reliable way to get your machine controller up and running. Upgrading the Totoku Electric MDT947B-2B CRT unit with a QES1508-057 Monitor is straightforward. First, remove the screw holding the CRT to the chassis. Second, remove all CRT electronics assemblies. Third, install your new replacement unit on the four (4) holes used to maintain the CRT. Finally, reconnect the harness back to your system, and it is done.
If you are uncomfortable with the prospect of upgrading your CRT Totoku Electric MDT-948B-3A yourself, Dynamic Displays will perform the retrofit at no cost to you. Just give us a call at 715-835-9440 or email us at firstname.lastname@example.org
The QES1508-057 operates from 9 to 36VDC and accepts the Monochrome TTL video signals used in Fanuc 0-C, 0-TC, 0-MC Series CNC Machine control for the original A61L-0001-0093 9-inch FANUC monitor with no need for signal adapters of any sort. This unit functions perfectly at the Fanuc 0-C, 0-TC, 0-MC monitor timing but it also operates with a variety of other TTL legacy monitor timing as well.
Featuring 600:1 contrast ratios and 450 nits brightness, the rugged QES1508-057 TTL LCD TFT display is an excellent replacement monitor for your legacy FANUC CRT display.
GE FANUC A61L-0001-0093 or Toshiba D9MM-11A, 9 IN CRT Display Replacement LCD On Customer Provided Chassis.
: Totoku MDT947B-2B, Totoku MDT947B2B, Totoku MDT-947B-2B, Fanuc A61L-0001-0093, Fanuc A61L00010093, Toshiba D9MM-11A, Toshiba D9MM11A, Samsung KF-M7099H, Matsushita Electronics KF-M7099H