Panasonic TX-1201FH Monitor Upgrade
Model QES1510-069 10.4 In LCD replaces Panasonic TX-1201FH, 12 In Color CRT Displays used in Okuma CNC Machines.
LCD Replacement for Panasonic Monitor TX-1201FH Upgrade Our Panasonic TX-1201FH Monitor Upgrade accepts the TTL video signals and was developed to drop in the mounting holes of the old CRT used in the Okuma CNC machine with no need for signal adapters of any sort. Featuring a 600:1 contrast ratio and 450 Cd/M2 brightness, this rugged QES1510-069 color LCD is an excellent replacement monitor for your legacy Panasonic TX-1201FH Monitor with CRT. If the Panasonic TX-1201FH monitor used Okuma systems has failed and you need to find a drop-in replacement monitor quickly, look no further. Our model QES1510-069 is a high-performance, 10.4 In LCD monitor whose rugged, open frame steel chassis was designed to drop right into the mounting holes of the original Panasonic TX-1201FH Monitor 12 In color CRT. Making it unnecessary to replace or make expensive modifications to the actual CNC machine. The process of the Panasonic TX-1201FH monitor upgrade unit with a QES1510-069 monitor is straightforward. Simply remove the screws holding the CRT to the chassis, remove all CRT electronics assemblies and install your new replacement unit on the four (4) holes used to maintain the CRT. Reconnect the harness back to your system, and it is done 😊. If you are uncomfortable with the prospect of upgrading your Panasonic TX-1201FH monitor yourself, Dynamic Displays can perform the retrofit at no cost to you. Just give us a call at 715-835-9440 or email us at sales@dynamicdisplay.com. Of Note: These monitors could be labeled as “Panasonic MFR’D by Matsushita or labeled as Matsushita Electric. There are many other legacy CRT models the QES1510-069 is a perfect LCD upgrade. The following is a list of replacements:
| QES1510-069 Replaces the Following CRT Monitors | |
| Hitachi | C12C-2455D01 |
| Okuma | E0105-653-017 |
| Okuma | E0105-653-423-1 |
| Okuma | E0105-800-055-1 |
| Okuma | E0105-800-059-1 |
| Okuma | E0105-800-134 |
| Okuma | E0105-800-144 |
| Okuma | E0105-800-195 |
| Okuma | HA-E0105-653-017 |
| Okuma | HA-E0105-653-042 |
| Okuma | HA-E0105-653-097 |
| Okuma | HA-E0105-653-098 |
| Okuma | HA-E0105-653-205 |
| Okuma | HA-E0105-653-206 |
| Okuma | HA-E0105-653-266 |
| Okuma | HA-E0105-800-134 |
| Monitech | ML104QN700 |
| Monitech | ML121PN5000 |
| Matsushita Electric | TX1201AD |
| Matsushita Electric | TX-1201AL, TX-1201AL-PZRT |
| Matsushita Electric | TX-1201AJ |
| Panasonic | TX-1201FH |
QES1510-069 Installed on Customer Provided Okuma OSP5020L CNC Machine
Equivalent Models: Okuma E01058000551, Okuma E0105 800 055 1, Okuma E0105800195, Okuma E0105 800 195, Okuma E0105800134, Okuma E0105 800 134, Okuma HAE0105653098, Okuma HAE0105653097, Okuma HA-E0105 653 097, Okuma HA E0105 653 098, Okuma C12C2455001, Okuma C12C 2455001, Okuma C12C2455D01, Okuma C12C 2455D01, Hitachi C12C2455D01, Hitachi C12C 2455D01