Model QES1508-121 8.4 In LCD replaces Matsushita TX-901AB Legacy 9 In RGB CRT Monitors, Fanuc system 16, 18, 20 and 21 series controls.
Matsushita TX-901AB , 9 IN COLOR CRT MONITOR REPLACEMENT
If the Toshiba D9CM-01A or Matsushita TX-901AB (Fanuc A61L-0001-0071 and A61L-0001-0095 Equivalent) 9 inch RGB CRT display in your FANUC 16, 18 or 20 Series CNC Machine control has failed and you need to find a drop-in replacement monitor quickly, look no further. Our QES1508-121 is a high performance, 8.4-inch Active Matrix Color TFT LCD monitor whose rugged, open frame steel chassis is designed to drop right into the mounting holes of the original Fanuc 9 inch color CRT, making it unnecessary to replace or make expensive modifications to the original FANUC CRT monitor chassis.
The QES1508-121 accepts the RGB TTL video signals used in FANUC 16, 18 or 20 Series CNC Machine control for the original A61L-0001-0071 and A61L-0001-0095 9 inch FANUC monitor with no need for signal adapters of any sort. This unit has been optimized to operate at the 20.3KHz/55.25Hz FANUC monitor timing but also operates with a variety of other TTL legacy monitor timing as well.
Featuring 600:1 contrast ratios and 450 nits brightness, the rugged QES1508-121 color LCD TFT display is an excellent replacement monitor for your legacy FANUC CRT display.
Fanuc A61L-0001-0095 and A61L-0001-0071 (Toshiba D9CM-01A and Matsushita TX-901AB) - Customer Provided Chassis.
: D9CM-01A, D9CM01A, TX-901AB, TX901AB, A61L-0001-0071, A61L00010071, A61L-0001-0095, A61L00010095