Matsushita TX-1201AL Monitor Upgrade
Model QES1510-069 10.4 In LCD replaces Panasonic TX-1201AL, 12 In Color CRT Displays used in Okuma CNC Machines and Allen Bradley 9 Series.
LCD Replacement for Matsushita Monitor TX-1201ALOur Matsushita TX-1201AL Monitor Upgrade accepts the TTL video signals and was developed to drop in the mounting holes of the old CRT used in the Okuma OSP5020L CNC machine with no need for signal adapters of any sort. Featuring a 600:1 contrast ratio and 450 Cd/M2 brightness, this rugged QES1510-069 color LCD is an excellent replacement monitor for your legacy Matsushita TX-1201AL Monitor with CRT. If the Matsushita TX-1201AL monitor used on the Okuma OSP5020L and many other Okuma systems has failed and you need to find a drop-in replacement monitor quickly, look no further. Our model QES1510-069 is a high-performance, 10.4 In LCD monitor whose rugged, open frame steel chassis was designed to drop right into the mounting holes of the original Matsushita TX-1201AL Monitor 12 In color CRT. Making it unnecessary to replace or make expensive modifications to the actual CNC machine. The process of the Matsushita TX-1201AL monitor upgrade unit with a QES1510-069 monitor is straightforward. Simply remove the screws holding the CRT to the chassis, remove all CRT electronics assemblies and install your new replacement unit on the four (4) holes used to maintain the CRT. Reconnect the harness back to your system, and it is done 😊. If you are uncomfortable with the prospect of upgrading your Matsushita TX-1201AL monitor yourself, Dynamic Displays can perform the retrofit at no cost to you. Just give us a call at 715-835-9440 or email us at email@example.com. Of Note: These monitors could be labeled as “Panasonic MFR’D by Matsushita" or labeled as "Matsushita Electric."
There are many other legacy CRT models the QES1510-069 is a perfect LCD upgrade:
|QES1510-069 Replaces the Following CRT Monitors|
|Matsushita Electric||TX-1201AL, TX-1201AL-PZRT|