FANUC A61L-0001-0093 9 inch Monochrome CRT MONITOR REPLACEMENT
Model QES1508-057 8.4 In LCD replaces Fanuc Model A61L-0001-0093 or Toshiba D9MM-11A, 9 In Monochrome TTL CRT Monitors used in Fanuc 0-C, 0-TC, 0-MC Series Control Panels.
GE FANUC A61L-0001-0093 9 IN Monochrome CRT MONITOR REPLACEMENT
When the A61L-0001-0093 9 inch Monochrome CRT monitor in your Fanuc 0-C, 0-TC, 0-MC Series CNC Machine control fails and you need to find a drop-in replacement monitor quickly, look no further. The rugged, open frame steel chassis of our high performance QES1508-057 8.4-inch Active Matrix TFT LCD monitor bolts right into the mounting holes of the original Fanuc 9 In CRT, making it unnecessary to replace or make expensive modifications to the original FANUC CRT monitor chassis. Furthermore, it has the same
The QES1508-057 operates of 24 volts DC and accepts Monochrome and Red-Green-Blue (RGB) TTL video signals used in Fanuc 0-C, 0-TC, 0-MC Series CNC Machine control for the original A61L-0001-0093 9 inch FANUC monitor with no need for signal adapters of any sort. This unit has been optimized to operate at the Fanuc 0-C, 0-TC, 0-MC monitor timing but also operates with a variety of other TTL legacy monitor timing as well.
Upgrading your A61L-0001-0093 9 inch Monochrome CRT monitor
If your old, unreliable CRT monitor fails, your CNC Controller can be down for days at a time when you need it the most. If and when this happens, the fastest and most reliable way to get your machine controller up and running is to install a reliable LCD upgrade. We've made upgrading your A61L-0001-0093 9 inch Monochrome CRT monitor with our QES1508-057 LCD display easy and straightforward. First, remove the screw holding the CRT to the chassis. Second, remove all CRT electronics assemblies. Third, install your new replacement unit on the four (4) holes used to maintain the CRT. Finally, reconnect the harness back to your system, and it is done.
Featuring 600:1 contrast ratios and 450 nits brightness, the rugged QES1508-057 TTL LCD TFT display is an excellent replacement monitor for your legacy FANUC CRT display.
GE FANUC A61L-0001-0093 or Toshiba D9MM-11A, 9 In Monochrome CRT Display Replacement LCD On Customer Provided Chassis.